FM2-Front Seat Fire Extinguisher Mount FJ Cruiser 4Runner Tacoma

FM2-Front Seat Fire Extinguisher Mount for ALL years of Toyota FJ Cruiser.
Click To Enlarge

FM2 - Front Seat Fire Extinguisher Mount

Fits FJ Cruiser - all years, 4Runner - 5th gen. (2009 - Present), Tacoma - 2nd and 3rd. gen. (2005 - Present), Lexus GX470 & GX460 - all years

  • Does not require any drilling, mounts to existing front seat bolt locations
  • Can be used on EITHER SIDE of front seat area (driver or passenger)
  • Main bracket made from strong, lightweight 3/16" 6061 Aluminum and is powder coated black
  • Includes mounting hardware
  • Fire Extinguisher NOT included
  • Allows the front seat to slide ALL of the way forward IF the fire extinguisher you use is short enough to fit between the rails, such as the WHITE extinguisher shown in the pictures.  The red extinguisher shown is wider than the rails and will only allow the seat to come forward about half way, but still plenty for passengers to ride in the back seat.

3 bracket sizes....

2.5 - 2.75lb extinguishers such as the Kidde 5BC, 10BC and 1A10BC and many other models (These models DO NOT have a notch on the neck)

2.5 - 2.75lb extinguishers such as the Kidde PRO2.5TCM, 21006401, PROPLUS2.5, FA5G, H5G, M5G, FC5, F55, M5GM and FX5 II  (These models DO have a notch on the neck, SEE LAST PICTURE above)

4 - 5lb extinguishers such as the Kidde PRO340 and PRO210 and many other models

WARNING! After the extinguisher is installed MAKE SURE to grab the seat adjustment rail by the CORNER when adjusting the seat, NOT the front of the rail so you don't pinch your fingers!

Installation Instructions

  * Marked fields are required.
Price $48.94