FC1-Forward Controls Honda Magna 750 94-03

NEW design!  Some of the pictures showing the old design are still used but these are what you will get.  All of the holes are in the exact same place so the installation and distances are all the same as the old design.

NOTE: FC1 shown here WITH OPTIONAL Brake and Shifter pedals installed.  The standard kit uses your stock Brake and Shifter pedals.  See picture below for exact contents of FC1 kit.

This is a polished aluminum forward control kit for all third generation Honda Magnas (1994-2003).

This kit is different from any other forward controls for the Magna in the following ways...

• It moves your controls forward about 10 inches and up about 1 inch. (more forward than any other)
• It uses your existing brake and shifter pedals which reduces the cost of the kit OR upgrade to the matching billet pedals.
• It does not come with foot pegs. Stock pegs WILL NOT work. They have 1/2" holes for stud or clevis mount footpegs which allow you dozens and dozens of choices for footpegs from makers such as Kuryakyn, Big Bike Parts, etc.  (No need to throw away those awesome footpegs you bought to match your grips and rear pegs; they will probably work!!)

The kit comes with everything you see here that is needed to extend your controls forward 10" except foot pegs.

They mount on existing bolt locations on your motor mount. No need to drill any holes, this is a 1 hour bolt on project.  You will get detailed instructions with pictures to make this an easy project for the do-it-yourselfer.

Just to be clear....This kit does NOT come with footpegs or shifter and brake pedals, it uses your stock shifter and brake pedals and almost any aftermarket footpegs with a 3/8" or 1/2" stud mount.

As you can see from the pictures below they are comfortable if you are 5'-6" or 6'-1".

Note the stock control location shown for comparison. (AHHH, LEG ROOM!)

 Also available powdercoated in Satin Black, just ask!

 Dealer inquiries welcome for any quantity.  Contact sales@refinedcycle.com

Available Options

PDL3 - Brake and Shifter Pedal Upgrade kit - $119.99

All Pedals include all necessary hardware and your choice of brake/shift peg style!

stock brake pedal

Billet brake pedal

Complete PDL3 Kit with hardware (Included stainless steel shifter linkage shown below).

PDL3 upgrade kit also includes one piece stainless steel shift linkage upgrade.

PDL3 - Brake and Shifter Pedal Upgrade kit - $119.99

Extended Toe Peg (shown next to 16c for comparison)

$4.99 Additional Ea.

Foot Pegs

Here are some Foot Peg choices for Refined Cycle Forward Controls.  Pegs can also be purchased separately from the PEGS page.

NOTE: Foot pegs with stud mount will bolt right on to Refined Cycle forward controls. Foot pegs with standard Harley male mount need a clevis adapter.

O-Ring Foot Pegs with 1/2" stud mount

$35.99 Set

Comfort Foot Pegs with 1/2" stud mount

$44.99 Set

Wide Ring Foot Peg with standard male mount AND includes Clevis Adapter shown on PEGS page.

$72.98 Set, including clevis

ISO Dually Foot Pegs with standard male mount AND includes Clevis Adapter shown on PEGS page.

$107.98 Set, including clevis

ISO Wings Foot Pegs with standard male mount AND includes Clevis Adapter shown on PEGS page

$135.98 Set, including clevis

Spike Foot Pegs with Matching Toe Pegs

Foot Pegs - 3/8-16 mounting bolt hole, 1" deep, 6.5" overall length (5.5" peg, 1" mount)

Toe Pegs - 5/16 mounting bolt hole, 1" deep, 3" overall length

 $135.99 4 Pc. Set

Installation Instructions for FC1 Forward Controls (94-03 Honda Magna)