DHM5R-Dual 5.75" Headlight Mount Adapter
This is a billet aluminum mount adapter that will allow you to mount TWO, 5.75" Dia. headlights, with 7/16" or 3/8" bottom stud mounts, on metric or standard bikes. Headlights sold separately.
DHM5R - Bottom
Mounts on your bike in 2 ways! For most metric bikes that have two mounting holes use two 1/4" or M6 bolts (not included) with the heads in the slot and adjust for your spacing. For most Harley / customs use one 3/8-16 bolt in the threaded hole.
DHM5R - Installed
To determine whether it will fit your bike use this picture and make the measurements for A, B and C.
For the DHM5R to fit your motorcycle...
- A must be 3" to 5.9" between centers AND
- B must be more than 6.75" AND
- C can be up to .25" BEHIND the steering stem
NOTE: If you would like help determining fit, email the following information... measurements A, B and C AND YEAR, MAKE, MODEL and SIZE.
Your stock headlight mount may have a place that your stock turn signals bolt on. You can upgrade signals at the same time along with new mounts or just get a nut and bolt them by themselves.
DHM5R - Installed
Add Refined Cycle SA1's to mount turn signals or spot lights to your DHM5R
- Item #: DHM5R
.jpg)
